Mercurial > hg > forks > yadex
annotate yadex.cfg @ 117:0612954ba99c default tip
Cosmetics.
author | Matti Hamalainen <ccr@tnsp.org> |
---|---|
date | Mon, 06 Oct 2014 16:36:48 +0300 |
parents | a862fd9906ec |
children |
rev | line source |
---|---|
0 | 1 # Yadex configuration file version 4 |
2 # ^ Don't modify the line above, it's there for something. | |
3 | |
4 | |
5 # | |
6 # Resources | |
7 # | |
8 | |
9 # The names of the iwads. | |
10 # # -g Description | |
11 # -- -------- ------------------------------------------------- | |
12 # 1 doom Doom (shareware or registered) and Ultimate Doom. | |
13 # 2 doom2 Doom II and Final Doom | |
14 # 3 heretic Heretic (shareware or registered) | |
15 # 4 hexen Hexen (demo or commerical) | |
16 # 5 strife Strife 1.1 and later (demo or commercial) | |
17 # 6 doom02 Doom alpha 0.2 (ftp.cdrom.com /pub/idgames/historic/doom0_2.zip) | |
18 # 7 doom04 Doom alpha 0.4 (ftp.cdrom.com /pub/idgames/historic/doom0_4.zip) | |
19 # 8 doom05 Doom alpha 0.5 (ftp.cdrom.com /pub/idgames/historic/doom0_5.zip) | |
20 # 9 doompr Doom press release pre-beta (/pub/idgames/historic/doomprbt.zip) | |
21 # 10 strife10 Strife 1.0 (demo or commercial) | |
22 | |
23 iwad1 = /usr/local/share/games/doom/doom.wad | |
24 iwad2 = /usr/local/share/games/doom2/doom2.wad | |
25 iwad3 = /usr/local/share/games/heretic/heretic.wad | |
26 iwad4 = /usr/local/share/games/hexen/hexen.wad | |
27 iwad5 = /usr/local/share/games/strife/strife1.wad | |
28 iwad6 = /usr/local/share/games/doom02/doom.wad | |
29 iwad7 = /usr/local/share/games/doom04/doom.wad | |
30 iwad8 = /usr/local/share/games/doom05/doom.wad | |
31 iwad9 = /usr/local/share/games/doompr/doompres.wad | |
32 iwad10 = /usr/local/share/games/strife10/strife1.wad | |
33 | |
34 # Name of the patch wads you want to load. None by default. | |
35 | |
36 #file = raphael.wad | |
37 #file = brendon.wad | |
38 | |
39 | |
40 # | |
44
a862fd9906ec
Introduce error resilience feature.
Matti Hamalainen <ccr@tnsp.org>
parents:
0
diff
changeset
|
41 # Error resiliency of the WAD / map loader. |
a862fd9906ec
Introduce error resilience feature.
Matti Hamalainen <ccr@tnsp.org>
parents:
0
diff
changeset
|
42 # |
a862fd9906ec
Introduce error resilience feature.
Matti Hamalainen <ccr@tnsp.org>
parents:
0
diff
changeset
|
43 # 0 = Bail on any and all errors (default) |
a862fd9906ec
Introduce error resilience feature.
Matti Hamalainen <ccr@tnsp.org>
parents:
0
diff
changeset
|
44 # 1 .. 3 = Ignore more and more errors. |
a862fd9906ec
Introduce error resilience feature.
Matti Hamalainen <ccr@tnsp.org>
parents:
0
diff
changeset
|
45 # 4 = Ignore almost all errors |
a862fd9906ec
Introduce error resilience feature.
Matti Hamalainen <ccr@tnsp.org>
parents:
0
diff
changeset
|
46 # |
a862fd9906ec
Introduce error resilience feature.
Matti Hamalainen <ccr@tnsp.org>
parents:
0
diff
changeset
|
47 # NOTICE that using anything else than 0 may lead to crashes when |
a862fd9906ec
Introduce error resilience feature.
Matti Hamalainen <ccr@tnsp.org>
parents:
0
diff
changeset
|
48 # loading broken data files! But it may also give you the chance to |
a862fd9906ec
Introduce error resilience feature.
Matti Hamalainen <ccr@tnsp.org>
parents:
0
diff
changeset
|
49 # rescue data from corrupted files, though it WILL require careful |
a862fd9906ec
Introduce error resilience feature.
Matti Hamalainen <ccr@tnsp.org>
parents:
0
diff
changeset
|
50 # manual work to repair the invalid parts. |
a862fd9906ec
Introduce error resilience feature.
Matti Hamalainen <ccr@tnsp.org>
parents:
0
diff
changeset
|
51 # |
a862fd9906ec
Introduce error resilience feature.
Matti Hamalainen <ccr@tnsp.org>
parents:
0
diff
changeset
|
52 error_resiliency = 0 |
a862fd9906ec
Introduce error resilience feature.
Matti Hamalainen <ccr@tnsp.org>
parents:
0
diff
changeset
|
53 |
a862fd9906ec
Introduce error resilience feature.
Matti Hamalainen <ccr@tnsp.org>
parents:
0
diff
changeset
|
54 |
a862fd9906ec
Introduce error resilience feature.
Matti Hamalainen <ccr@tnsp.org>
parents:
0
diff
changeset
|
55 # |
0 | 56 # Editing options |
57 # | |
58 | |
59 # Name of the default game ("doom", "doom02", "doom04", | |
60 # "doom05", "doom2", "doompr", "heretic", "hexen" or "strife"). | |
61 # Can be overridden by -g or YADEX_GAME. This parameter has no | |
62 # default value. | |
63 | |
64 game = doom2 | |
65 | |
66 # If you set it to yes, when you copy a group of linedefs, each | |
67 # new linedef will use the same sidedefs as its model. This | |
68 # makes for leaner wad files but you better know what you're | |
69 # doing ! Off by default. | |
70 | |
71 #copy_linedef_reuse_sidedefs = no | |
72 | |
73 # [Deprecated] Answers "Yes" to many confirmation prompts. Off | |
74 # by default. This option will be replaced by individual | |
75 # confirmation options. | |
76 | |
77 #expert = false | |
78 | |
79 # Finer-grained confirmation options. | |
80 # Those variables can be set to one of three values : | |
81 # "yes" : don't prompt you, act as if you answered "yes", | |
82 # "no" : don't prompt you, act as if you answered "no", | |
83 # "ask" : always prompt you, | |
84 # "ask_once" : prompt you only for the first item of a group. | |
85 | |
86 # If you insert a new vertex on top of an existing vertex, | |
87 # should we merge the two vertices ? Default is "ask_once". | |
88 | |
89 #insert_vertex_merge_vertices = yes | |
90 | |
91 # If you insert a new vertex on top of an existing linedef, | |
92 # should we split the linedef there ? Default is "ask_once". | |
93 | |
94 #insert_vertex_split_linedef = yes | |
95 | |
96 # Blindly swap the sidedefs on a linedef, i.e. without any | |
97 # warning prompt. Default is false. | |
98 | |
99 #blindly_swap_sidedefs = false | |
100 | |
101 # Is the infobar shown ? On by default. | |
102 | |
103 #info_bar = true | |
104 | |
105 # Set this to true if you want to have the object 0 | |
106 # automatically selected when you switch from one editing mode | |
107 # to another. Off by default. | |
108 | |
109 #select0 = false | |
110 | |
111 # Bounds of grid step. | |
112 | |
113 #grid_max = 128 | |
114 #grid_min = 2 | |
115 #grid_pixels_min = 10 | |
116 | |
117 # Default attributes of new things, linedefs, sidedefs and | |
118 # sectors. 3004 is the number for a former human. | |
119 | |
120 #default_ceiling_height = 128 | |
121 #default_ceiling_texture = CEIL3_5 | |
122 #default_floor_height = 0 | |
123 #default_floor_texture = FLOOR4_8 | |
124 #default_light_level = 144 | |
125 #default_lower_texture = STARTAN3 | |
126 #default_middle_texture = STARTAN3 | |
127 #default_thing = 3004 | |
128 #default_upper_texture = STARTAN3 | |
129 | |
130 # Initial zoom factor when opening a new edit window, in | |
131 # percent. The special value 0 causes Yadex to adjust the zoom | |
132 # factor so that the level fills the window, as if you had | |
133 # pressed [`]. It's the default. | |
134 | |
135 #zoom_default = 0 | |
136 | |
137 # Ratio between two sucessive zoom factors, in percent. The | |
138 # scale is increased by that many percent every time you zoom | |
139 # in. The special value O sets the ratio to the square root of | |
140 # two (slightly above 41% increase). It's the default. | |
141 | |
142 #zoom_step = 0 | |
143 | |
144 # Value to which [1] sets the zoom factor, in percent. | |
145 | |
146 #digit_zoom_base = 100 | |
147 | |
148 # Ratio between successive zoom factors for digit keys, in | |
149 # percent. | |
150 # | |
151 # [1] sets the zoom factor to digit_zoom_base | |
152 # [2] sets the zoom factor to digit_zoom_base * digit_zoom_step | |
153 # [3] sets the zoom factor to digit_zoom_step * digit_zoom_step ** 2 | |
154 # ... | |
155 # [0] sets the zoom factor to digit_zoom_step * digit_zoom_step ** 9 | |
156 # | |
157 # In other words, if this parameter is positive (negative), the | |
158 # zoom factor increases (decreases) across the keyboard. The | |
159 # special value 0 sets the ratio to the inverse of the square | |
160 # root of two, which is about the same thing as setting it to | |
161 # -29. It's the default. | |
162 | |
163 #digit_zoom_step = 0 | |
164 | |
165 | |
166 # | |
167 # Graphic output options | |
168 # | |
169 | |
170 # (X) Use this to set the initial size of the window. If the | |
171 # value is a number, it is taken as a number of pixels. If the | |
172 # value is a percentage, it is taken as a percentage of the | |
173 # corresponding dimension of the screen. Both values default to | |
174 # 90%. | |
175 | |
176 #width = 90% | |
177 #height = 90% | |
178 | |
179 # (DOS) Use this to change the default video mode if you have a | |
180 # SuperVGA driver. (0 = standard VGA, 1 or 2 = 640x480x256, 3 = | |
181 # 800x600x256, 4 = 1024x768x256) Default BGI driver in "vesa". | |
182 # Default mode is 2. | |
183 | |
184 #bgi = vesa | |
185 #video = 2 | |
186 | |
187 # (DOS only) Set this if you have an old mouse driver | |
188 # and you don't see the cursor. Off by default. | |
189 | |
190 #fake_cursor = false | |
191 | |
192 # (X) Set this if you want to use another font than your X | |
193 # server's default one. It's better to choose a fixed-width | |
194 # font. Here are examples of fonts that should be available on | |
195 # all X servers. If Yadex cannot find the specified font, it | |
196 # fall backs on the X server's default font. | |
197 | |
198 #font = fixed | |
199 #font = 5x7 | |
200 #font = 5x8 | |
201 #font = 6x9 | |
202 #font = 6x10 | |
203 #font = 6x12 | |
204 #font = 6x13 | |
205 #font = 6x13bold | |
206 #font = 7x13 | |
207 #font = 7x13bold | |
208 #font = 7x14 | |
209 #font = 7x14bold | |
210 #font = 8x13 | |
211 #font = 8x13bold | |
212 #font = 8x16 | |
213 #font = 9x15 | |
214 #font = 9x15bold | |
215 #font = 10x20 | |
216 #font = 12x24 | |
217 #font = lucidasanstypewriter-12 | |
218 font = -b&h-lucidatypewriter-medium-r-normal-sans-12-120-75-75-m-70-iso8859-1 | |
219 #font = lucidasanstypewriter-14 | |
220 #font = -schumacher-clean-medium-r-normal--13-130-75-75-c-80-iso8859-1 | |
221 #font = -schumacher-clean-medium-r-normal--14-140-75-75-c-80-iso8859-1 | |
222 #font = -schumacher-clean-medium-r-normal--15-150-75-75-c-90-iso8859-1 | |
223 #font = -schumacher-clean-medium-r-normal--16-160-75-75-c-80-iso8859-1 | |
224 | |
225 # The relative scale at which sprites are displayed on the | |
226 # level, in percent. Does *not* affect the sprite viewer or | |
227 # object info box. Default is 100. | |
228 | |
229 #sprite_scale = 100 | |
230 | |
231 | |
232 # | |
233 # Miscellaneous options | |
234 # | |
235 | |
236 # Autoscrolling is the map scrolling automatically when the | |
237 # pointer comes close to the edge of the window/screen. | |
238 # | |
239 # autoscroll_amp The amplitude of the scrolling in percent | |
240 # of the screen/window width/height. Default | |
241 # is 10. | |
242 # | |
243 # autoscroll_edge How near in pixels the pointer must come | |
244 # close to the edge of the screen/window for | |
245 # autoscrolling to occur. Default is 30. | |
246 # | |
247 # autoscroll Controls whether autoscrolling occurs at | |
248 # all. Off by default. | |
249 | |
250 #autoscroll = false | |
251 #autoscroll_amp = 10 | |
252 #autoscroll_edge = 30 | |
253 | |
254 # Time in ms to sleep before polling events again if got no | |
255 # event. The shorter the delay, the smoother the response, the | |
256 # more CPU you hog and, if running X over a network, the more | |
257 # bandwidth you use. Above 100 ms, the response starts to be | |
258 # uncomfortably jerky. The default, 50 ms, is fine. | |
259 | |
260 #idle_sleep_ms = 50 | |
261 | |
262 # Users don't need to set this. | |
263 | |
264 #debug = false | |
265 | |
266 # How close in milliseconds two clicks must be for Yadex to | |
267 # think it's a double click. The default is 200 ms. | |
268 | |
269 #double_click_timeout = 200 | |
270 | |
271 # By default, Yadex beeps when you try an invalid command or | |
272 # when it finds an error during the checks. Setting quieter to | |
273 # true prevents it from beeping at all. Setting quiet to true | |
274 # has no effect. | |
275 | |
276 #quiet = false | |
277 #quieter = false | |
278 | |
279 # Amplitude of scrolling in percents of the screen/window | |
280 # width/height. As of this release, the bindings are : | |
281 # - scroll_less: arrow keys. Default is 10% | |
282 # - scroll_more: [Pgup], [Pgdn], [Home], [End]. Default is 90% | |
283 | |
284 #scroll_less = 10 | |
285 #scroll_more = 90 | |
286 | |
287 # Make Yadex think that the left and right buttons of the mouse | |
288 # have been swapped. Off by default. | |
289 | |
290 #swap_buttons = false | |
291 | |
292 # General verbosity level. Can be useful to track down | |
293 # problems. Same thing as "-v". Off by default. | |
294 | |
295 #verbose = false | |
296 | |
297 # Be helpful to new users. On by default. | |
298 | |
299 #welcome_message = true | |
300 |